Foma F903i' 06.10 страница 268 Скачать руководство пользователя

Страница: 268 / 567

266

ppli

INFORMATION

･

When i-

ppli with vertical size of more than 240 dots

is activated, it appears on the full-screen. When

ppli with horizontal size of more than 240 dots is

activated, it appears on the wide display. For such

ppli, screen mode may not be changed by rotating

the display.

･

On the full-screen or wide display, each pressing of

side key [

▲

] switches between displaying and hiding

the battery icon.

･

The volume of sound emitted during i-

ppli

operation can be adjusted. Note that some i-

ppli

have no sound.

→

P115

･

Images used on i-

ppli or your entered data may

automatically be sent to the server via Internet.

Images used on i-

ppli are images that are shot with

the camera while i-

ppli is activated, or images

downloaded using the i-

ppli infrared

communication/iC transmission function.

･

Partially saved i-

ppli allows only detail information

display, deletion, protection and folder change.

･

IC card data transferred by

iCお引っこしサービス

(iC

transfer service) allows only deletion.

･

ppli that uses microSD memory card can save data

in it. Data saved in microSD memory card may not be

available for other models. i-

ppli that uses microSD

memory card can be viewed with "i-

ppli data".

→

P338

･

ppli is interrupted when any of the following

conditions occur. Upon completion of the current

operation, i-

ppli restarts; selecting "i-

ppli" after

pressing

allows to restart i-

ppli while

continuing the current operation (except for the ones

marked with *). Some i-

ppli may not return to the

state of interruption.

- When there is an incoming voice call (except when Ring time

is set to "0 Sec." for Voice Mail service and Call forwarding

service)

- When there is an incoming videophone call (except when

Ring time is set to "0 Sec." for Voice Mail service and Call

forwarding service)

- When there is an incoming PushTalk call (except when

communicating with "i-mode preferred" set in i-mode arv.

act:PT)

- When Lock on close is activated

- When the date and time specified in Timer, Alarm clock or

schedule has come

- When the function is switched over to another function

･

When you are out of service area or the saved data

cannot be used, i-

ppli may not start or not operate

correctly.

･

For certain i-

ppli, the IP (Information Provider) may

access i-

ppli saved in the mobile phone and directly

set operation disabled state. In such a case, i-

ppli

startup, stand-by display settings, upgrading, etc. are

disabled, enabling only deletion and software detail

information display. To resume using i-

ppli,

notification of i-

ppli enabled must be received;

contact the IP (Information Provider).

･

For certain i-

ppli, the IP (Information Provider) may

send data to i-

ppli saved in the mobile phone.

･

When the IP (Information Provider) requests i-

ppli

for stopping or restarting or sends data to i-

ppli,

FOMA terminal makes communications and

blinks. In this case, no communication fee will be

charged.

･

For i-

ppli builders:

If i-

ppli does not operate normally while building,

trace display may help. Press

m334

the stand-by display to display the trace information.

Note that trace information is not displayed if i-

ppli

that records trace information is not in the software

list.

To delete trace information, press

and select

"Yes".

Displaying history when operation
finishes without using saved data
<Security error hist.>

When i-

ppli ended with an error because i-

ppli

cannot use the saved data, the name of the i-

ppli,

date and time, and cause of the security error are
recorded.

Only the last 20 records of security error history
are to be recorded. Except the last 20 records,
record is deleted chronologically.

333

･

To delete histories, press

and select

"Yes".

Displaying i-

ppli Description

<Software description>

Detail information such as name and version of the
i-

ppli can be displayed.

(1 sec. or more)

Select a folder

Place the cursor on the i-

ppli to display

the detail information and

[Details]

･

Displayed items differ depending on i-

ppli.

･

To check the site certificate of the i-

ppli

downloaded from SSL page, press

the Software description screen.

Setting operating condition of i-

ppli

<Software Settings>

Operating conditions are set for each i-

ppli.

(1 sec. or more)

Select a folder

Place the cursor on the i-

ppli to set and

Select and set the required

items below

[Record]

･

You cannot select the item not supported by
the i-

ppli.

Содержание F903i' 06.10























































































































































































































































































































































































































































































































































































Результаты поиска

Содержание F903i' 06.10

Отзывы:

Похожие инструкции для F903i' 06.10

Бренды по названию

Популярные бренды

Foma F903i' 06.10, Руководство пользователя

Результаты поиска

Содержание F903i' 06.10

Отзывы:

Похожие инструкции для F903i' 06.10

Бренды по названию

Популярные бренды