Foma F903i' 06.10, Руководство пользователя

Страница: 379 / 567

377
Other Convenient Functions
4 h
to switch to Set others screen
e
Select and set the required items below
Vibrate alert:
Set the vibration alert to be used at the
specified time.
･
When you select "Select", select the
vibrate pattern.
･
Setting "Terminal setting" applies to
settings of Alarm clock in Vibrate alert/
effect.
Light pattern:
Set the lighting pattern of the light to be
used at the specified time.
･
When "Sync melody" or "OFF" is set, Light
color cannot be set.
Light color:
Set the lighting color of the light.
5
Press
p
[Set].
･
When Alarm clock is set, or (when
a schedule reminder is also set) is indicated
on the stand-by display.
When the specified time arrives
The following screen (or set movie/i-motion)
appears on the display and the settings apply to the
operation.
I
Pressing
f
while the alarm clock is sounding
ends the alarm clock and returns to the previous
screen.
I
When no operation is carried out for
approximately 1 minute or any key other than
f
or side key [
▼
] is pressed, the alarm clock
stops. Snooze operation is started when Snooze
is set to "ON".
I
While alarm clock is stopped with Snooze
operation activated, "
スヌーズ中
Snooze"
appears on the display (if a movie/i-motion is set,
its first image appears) and the light flashes in
blue slowly.
I
While Alarm clock is stopped, press
c
or
f
to deactivate it. Press
f
to deactivate during
Snooze.
I
To stop the alarm clock while the FOMA terminal
is folded, press any one of side key [
▲
],
P
or
M
.
INFORMATION
･
When multiple alarm clocks are set for the same time,
the alarm clock with the smallest number assigned in
the alarm clock list will operate.
･
If an alarm clock and schedule reminder are set for
the same date and time, the alarm clock immediately
stops or starts snooze operation after sounding,
succeeded by notification of the schedule reminder.
When
f
is pressed, the schedule reminder ends,
but the alarm clock stops or starts snooze operation.
･
When the specified time arrives during a call (after
call on-hold, if active, is canceled) or PushTalk
session, a warning sound is emitted instead of alarm
clock sound and the alarm clock screen appears.
･
When the specified time arrives in the following
cases, the alarm is activated after the operations or
actions are completed.
- While making/receiving/calling/disconnecting a call or
PushTalk call
- During transmission/reception of 64K data communications
- In data transfer mode
- Infrared remote control function in operation
･
When the specified time arrives while displaying
Chara-den, the alarm clock sounding may delay
several seconds.
･
When data set for Alarm sound is deleted, "Terminal
setting" is set.
Alarm auto power ON
Turning power ON
automatically at set alarm time
You can set whether to automatically turn the
power ON to activate the alarm if the power is OFF
when the date and time specified for the alarm
clock or schedule arrive.
1 m e 8725 e 1
or
2
INFORMATION
･
This function does not operate if power supply to
FOMA terminal is stopped in a way other than power
OFF operation or Auto power OFF settings, for
example, by removing the battery pack.
･
In addition to turning the FOMA terminal OFF, set this
function to "OFF" in areas where use of a mobile
phone is prohibited, such as in airplanes, medical
facilities or hospitals.
Default OFF