Foma F903i' 06.10, Руководство пользователя

Страница: 219 / 567

217
Mail
■
Entering by searching phonebook : Select
"View phonebook"
e
Search the
phonebook
e
Select a phonebook entry to
send the message
■
Entering mail address from mail group :
Select "Mail group"
e
Select a mail group
from the list
･
Mail addresses must be saved in mail
group in advance.
･
If the total of already entered address and
mail group address are exceeds 5
addresses, the mail group cannot be added.
3
Select the subject field
e
Enter the
subject
･
Up to 15 two-byte or 30 one-byte characters
can be entered.
4
Select the message text field
e
Enter
message
･
Up to 5,000 two-byte or 10,000 one-byte
characters can be entered.
･
Press
#
to enter line feed (except one/
two-byte number input mode).
■ Pasting URL of location information :
m e
56
The next procedure
→
P291 "
■
Using
location information from functions other
than GPS"
･
When location information is pasted,
location information URL are entered to
the text, respectively, and
is added
before the URL.
■ Inserting signature :
m e 57
･
Signature must be recorded beforehand.
5
Press
p
[Send].
･
To stop transmission, press
g
on the
connecting screen or press
p
on the
sending screen. Note that the i-mode mail
may be sent depending on the operation
timing. The sent message is saved in "Unsent
messages" folder of Unsent messages.
･
When you are outside the service area, a
confirmation screen appears asking
whether to set Auto-send, provided that the
number of Auto-send messages is less than
5. When you select "Yes", i-mode mail with
Auto-send set is saved in "Unsent
messages" folder of Unsent messages.
INFORMATION
･
When a message larger than 10,000 bytes is
automatically saved due to other functions being
started, part of the message being composed may
not be saved.
･
Depending on the signal quality, characters may not
be displayed correctly at the receiver side.
･
When transmission fails, an error message is
displayed and the i-mode mail is saved in "Unsent
messages" folder of Unsent messages. i-mode mail
can be edited/sent from "Unsent messages" folder in
Unsent messages.
･
Even when i-mode mail is sent correctly, an error
message "Transmission failed." may be displayed
depending on the signal quality.
･
When transmission is completed correctly, the
i-mode mail is saved in a folder of Outbox. When the
memory is not enough or the maximum number of
saved items is reached, the oldest sent message is
deleted chronologically. Be sure to protect sent
message you want to keep.
･
When i-mode mail containing pictograms is sent to a
mobile phone of a telecommunication carrier (au,
SoftBank or Tu-Ka) other than DoCoMo, the
pictograms are automatically converted to similar
pictograms on the receiver's terminal. Note that, the
pictograms may not be displayed correctly on the
receiver's terminal depending on the models and/or
functions of the receiver's terminals and they may be
converted to 〓 if there are no applicable pictograms.
･
When Deco-mail pictogram (Pictogram D) is used, the
message is sent as Deco-mail.
･
Error messages for address unknown, etc. may not
be received when messages are sent to addresses
other than DoCoMo.
･
When the memory is not enough or the maximum
number of saved items is reached, i-mode mail
cannot be created or send. Delete unnecessary
i-mode mail and/or SMS from the folder in Unsent
messages.
Adding address <Add address>
i-mode mail can be sent to multiple addresses at
the same time (Simultaneous sending) regardless
of the address type.
I
Up to 5 messages can be sent. They cannot have
a same destination.
The remaining number of
characters that can be
entered as the text (bytes)
Continue
e