Foma F903i' 06.10, Руководство пользователя

Страница: 467 / 567

465
Appendix/External Device Networking/Troubleshooting
●
Call cost is not totalized.
■ Mail, i-
α
ppli and data
● Still images and movie taken with the camera are blurred.
● Mail reception is announced with a ring alert not set.
●
Names do not appear or ring alert does not sound
at the time of mail reception even though they have
been registered in the Phonebook.
● When a message is received, the light operates in a
lighting pattern or lighting color not set.
● The still image and movie is displayed as and
.
● The screen reacts slowly when a key is pressed.
●
i-
α
ppli/i-
α
ppli stand-by display cannot be activated.
●
The lighting for the display does not go ON while
i-
α
ppli is running.
● Music data cannot be transferred from PC.
■ Other
●
Osaifu-Keitai function cannot be used.
●
At the time of authenticating or registering
fingerprint, a message "Scan failed." or "Finger slid
too slowly." is displayed even though your finger is
not in contact with the sensor.
● Fingerprint authentication disabled with FOMA
terminal connected to PC, etc.
･
The call cost totalized on the UIM may have
reached the upper limit (approximately
￥
16,770,000). It can be reset to 0 yen.
→
P390
･
Shoot in Shake reduce Auto mode. → P178
･
When shooting an object nearby, use Auto focus
or switch to Macro shooting.
→ P166, P175
･
Mail ring alert, if any, set for multiple functions
operate in accordance with the priority levels.
→ P113 "Ring alert priority"
･
When multiple messages are received at the same
time, the mail ring alert sounds depending on the
conditions set for the last message received.
･
Have you activated Privacy mode? → P150
･
The phone number or mail address of the other
party does not match that is saved in Phonebook.
Save the correct phone number and mail address
in the Phonebook. (Name displays
→ P92)
･
Have you activated Privacy mode? → P150
･
Is Receive display set?
→
P152
･
Lighting patterns and/or lighting colors of Light
alert, if any, set for multiple functions operate in
accordance with the priority levels.
→
P136 "Light
alert priority"
･
When multiple messages are received at the same
time, the light operates depending on the
conditions set for the last message received.
･
Have you activated Privacy mode?
→
P150
･
If the data has been destroyed, it cannot be
correctly displayed and
or appears.
･
While transferring large-size data between FOMA
terminal and microSD memory card, reactions on
the FOMA terminal screen may have a delay.
･
Is the UIM connected properly? Because of the
UIM operation restriction function, i-
α
ppli cannot
be activated when the UIM is replaced or no UIM
is inserted.
→
P36
･
Has i-
α
ppli been in stopped condition by IP
(Information Provider)?
･
Activating i-
α
ppliDX requires the date and time
setting of FOMA terminal.
→
P43
･
With i-
α
ppliDX, communication may be made to
confirm the validity of i-
α
ppli regardless of the
network transmission setting of i-
α
ppli. Some
i-
α
ppli may not be activated until confirmation of
the validity have finished.
･
i-
α
ppli stand-by display cannot be started while All
lock, Omakase Lock, PIM lock or Privacy mode is
ON ("Authorized access" set for i-
α
ppli).
→ P147, P148, P149, P150
･
When "0 sec" is set for Normal use in Display light
time and "Terminal setting" is set for Display light
of i-
α
ppli, the display light does not light.
→ P131, P267
･
When "Software" is set for Display light of i-
α
ppli,
the display light does not light in Public mode.
･
Use software " ポータブルデバイス用パソコン環境
診断
(PC environment diagnosis for portable
device)" contained in the attached CD-ROM. For
details, see attached CD-ROM.
･
Have you activated IC card lock?
→
P287
･
In case the battery pack is not connected properly,
or the battery pack is removed, IC card lock is
activated, which disables Osaifu-Keitai function.
Make sure that the battery pack is connected
properly and turn the power OFF, then ON.
→ P37
･
The surface of the sensor may be wet or dew may
have condensed on the surface. Wipe the water off
with a soft cloth before use.
･
When connecting FOMA terminal using a USB
cable to a device which requires grounding such
as a desktop PC, make sure that the device is
grounded in advance. If the connected device is
not grounded, fingerprint authentication may be
disabled. In such a case, carry out fingerprint
authentication while touching metallic part (frame,
external connection jack, etc.) of the connected
device or after disconnecting FOMA terminal from
the device.
Continue
e