Axia element v.2.0, Инструкция по установке и эксплуатации

Страница: 76 / 186

5: E
le
m
en
t O
pe
ra
tio
ns •
66
©2016 Axia Audio- Rev 1.8.1
4-Phone Module Channel Controls
You can assign any type of source to any Element
fader module, but some fader modules include
special keys that provide extra functions for cer-
tain types of sources. The 4-Phone Fader Mod-
ule (Figure 5-2) is one of these modules. If a nor-
mal line source is assigned to a Phone Fader, the
fader and its controls operate exactly like a stan-
dard 4-Fader Module (described in the previous
section). But when a Telos telephone hybrid is
assigned to one of these faders, extra functional-
ity is enabled.
Taking Calls
The Status Symbol box above the alpha dis-
play indicates an available line by displaying a
single dot. A call ringing in shows a “ringing”
icon. It is answered by pushing either the
On
or
Preview
button. If
Preview
is already on, tog-
gling to
Off
and then
On
answers the call. When
the call is answered, an “up arrow” icon displays.
Also, a window on Element‘s screen will show
call status and incoming caller ID (if available).
When the phone channel is off and in Pre-
view, press
Off
to drop the call. When the chan-
nel is on, press
Off
once to put the caller on hold;
twice to drop.
Making Calls
To dial out from the console, press any con-
trol key (
Off
,
On
,
Hold
,
Set
, or
Preview
) on a
fader that hosts a Phone source. This assigns the
Keypad on the Monitor Module to that fader. Di-
aling works like a mobile phone: enter all digits,
then press the
Enter
(
8
) or
Pound
(#) key to
place the call. The Status Symbol icon above the
fader indicates first that a line is active and then
that the call is proceeding. The Element display
screen will also indicate the numbers dialed and
call status.
•
Set Key
If you’re using certain Telos broadcast phone sys-
tems, pressing the
Set
key transfers the phone
line assigned to that fader to a handset. These
buttons are mutually exclusive across all faders;
touching a
Set
key on any Phone Fader switches
the handset to the line assigned to that fader and
cancels any previous line selection. For details
on Telos phone systems that utilize the
Set
key,
please refer to Appendix D: Working With
Phone Hybrids
•
Hold Key
Pressing
Hold
sends a hold command to the
connected Telos phone system. When connected
to European ISDN lines, a hold signal is sent to
the network. With USA ISDN lines, no network
hold function is available, so the hybrid enters a
virtual hold state.
Note: The Element’s 2-Fader Monitor Mod-
ule also includes two Phone faders com-
plete with Set and Hold buttons.
Figure
5-2:Phone
Module Fader
Channel