Axia element v.2.0 Скачать руководство пользователя страница 152

Страница: 152 / 186

x B

: C

E C

y •

CE Mark Conformance, Cont’d

Testing was conducted during the period September 22 - October 19, 2005.

1.2 Purpose Testing was performed to evaluate safety, emissions and immunity, conformance to enable CE mark-

ing.

1.3 Conclusions The Element audio control surface was found to be compliant and CE marking was applied to

the product.

Conformity is declared to the standards: EN50081-1, EN50082-1.

2.0 HF Radiated Emissions

2.1 Standards Applied The unit was laboratory evaluated according to standard: EN50081-1 using Measurement

Document: EN55022, Class B.

2.2 Testing The unit was tested and evaluated by: Smith Electronics*

2.3 Test Results The unit was found to be in conformance for both radiated and line-conducted emissions.

3.0 Immunity

3.1 Standards Applied

3.1.1 ESD Susceptibility Measurement Document: IEC 1000-4-2 (IEC 801-2). Immunity to static electricity.

3.1.2 Radiated Susceptibility - HF Electric Field Document: IEC 1000-4-3 (IEC 801-3).

3.1.3 Conducted Susceptibility - Power Line Measurement Documents: Burst/Transients: IEC 1000-4-4 (IEC

801-4), Surge: IEC 1000-4-5 (IEC 801-5) Voltage Fluctuations: IEC 1000-4-1 (IEC 801-1)

3.2 Testing

3.2.1 ESD Immunity The unit was tested and evaluated by: Smith Electronics*

3.2.2 Radiated Immunity - RF Electric Field The unit was tested and evaluated by: Smith Electronics*

3.2.3 Conducted Immunity - Power Line Testing to IEC 801-4 was conducted by: Smith Electronics*

*Smith Electronics

8200 Snowville Rd.

Cleveland, OH 44141 (USA)

CE Conformance

This device complies with the requirements of EEC Council Directives 93/68/EEC (CE Marking); 73/23/EEC

(safety low-voltage directive); 89/336/EEC (electromagnetic compatibility). Conformity is declared to the following

standards:: EN50081-1, EN50082-1.

Содержание element v.2.0



























































































































































































Результаты поиска

Содержание element v.2.0

Отзывы:

Похожие инструкции для element v.2.0

Бренды по названию

Популярные бренды

Axia element v.2.0, Инструкция по установке и эксплуатации

Результаты поиска

Содержание element v.2.0

Отзывы:

Похожие инструкции для element v.2.0

Бренды по названию

Популярные бренды