Agilent Technologies E5070B, Руководство пользователя

Страница: 429 / 769

Chapter 12 423
Optimizing Measurements
Performing a Segment-by-Segment Sweep (segment sweep)
1
2
. O
pt
imiz
ing
M
e
as
ur
em
e
nt
s
Saving a newly created segment table in CSV format
As discussed in “Creating a segment table” on page 419, you can export the newly created
segment table as a CSV (comma-separated value) formatted file (so it can be used easily in
software that requires a different format).
Step 1. Press .
Step 2. Press
Edit Segment Table
.
Step 3. Press
Export to CSV File
to open the Save As dialog box. For more information on the
Save As dialog box, see Figure 10-1, “Save As dialog box,” on page 355. Note that “CSV
Files (*.csv)” will already be selected as the file type when the dialog box first opens.
Step 4. Type the file name in the
File Name
area and press
Save
to save the segment table.
Calling a segment table saved in CSV Format
By importing a segment table created following the steps described in “Saving a newly
created segment table in CSV format” on page 423 (inputting a file in a different software
format), you can set up the segment table.
NOTE It is possible to recall a file from a different channel where it was saved.
Step 1. Press .
Step 2. Press
Edit Segment Table
.
Step 3. Press
Import from CSV File
to open the Open dialog box. For more information on the
Open dialog box, see Figure 10-3, “Open dialog box,” on page 357. Note that “CSV Files
(*.csv)” will already be selected as the file type when the dialog box first opens.
Step 4. Select the CSV format file to be imported, and press
Open
to call up the segment table.
NOTE You cannot import a CSV-formatted file created/edited in spreadsheet software into the
E5070B/E5071B. Furthermore, you cannot import a CSV-formatted file previously
exported following the steps in “Saving a newly created segment table in CSV format” on
page 423 if a change has been made to that file.