Agilent Technologies E5070B, Руководство пользователя

Страница: 209 / 769

Chapter 4 203
Calibration
Specifying Different Standard for Each Frequency
4. Cal
ibra
tion
Defining standard for each subclass
This section demonstrates the procedure to specify a different OPEN standard for each
frequency band, using subclasses #1 and #2. In this example, the standards created in
“Defining different standard for each frequency band” on page 202 are used.
Procedure
Step 1. Press .
Step 2. Press
Cal Kit
.
Step 3. Select a calibration kit you want to use. (In this example, use the calibration kit defined in
Step 3 of “Defining different standard for each frequency band” on page 202.)
Step 4. Press
Modify Kit
.
Step 5. Press
Specify CLSs
.
Step 6. Press
Sub Class
, and select
Sub Class 1
.
Step 7. Select the standard type
Open
, press
Set All
, make settings for all ports.
Step 8. Select #1 (
Open 3G
).
Step 9. Press
Return
.
Step 10. Then, press
Sub Class
, and select
Sub Class 2
.
Step 11. Select the standard type
Open
, press
Set All
, make settings for all ports.
Step 12. Select #2 (
Open 6G
).
Step 13. Press
Return
.