manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 582

13-18

CELL-DYN

®

3200 System Operator’s Manual

9140181H—October 2001

Sample Loader

Sample Loader Description

Section 13

b. DO NOT move the remaining tubes in the rack, otherwise Work List 

entries will also have to be changed to reflect the new rack and tube 
positions of the remaining samples. Place the rack in the starting 
position.

5. Replace the Tower Cover and press 

[START LOADER]

 followed by

 [RESET 

LOADER]

 to resume operations.

Stopping the Sample Loader

The Sample Loader automatically halts when all loaded racks have been processed. 
There are three ways to stop the Sample Loader during processing, as described 
below:

1.

Power OFF

. Turn the Main Power Switch on the Analyzer to OFF. This 

method is not recommended unless there is an emergency.

2.

Orderly Stop

. Press 

[STOP LOADER]

 for an orderly stop. Orderly stops allow 

to complete aspiration of the sample that is currently or has been mixed in 
Mixing Station 2 and finish the vent/aspiration/cleaning process. The 

[START 

LOADER]

 

soft key appears and you should press it to start the sample loading 

process again.

3.

Emergency Stop

. Remove the Tower Cover to break the safety interlock 

sensor connection. Emergency stops cause the Aspiration Needle to retract if 
already in the tube and the Mixer to return the tube(s) to the rack before 
bringing the Sample Loader to a halt. To completely remove the cover, lift it 
vertically. An emergency stop results in a Fatal Fault condition. To resume 
the sampling process:
a. Re-attach the Tower Cover.
b. Re-initialize and prime the instrument. The Sample Loader is 

automatically initialized when the Analyzer is initialized.

NOTE:

To initialize the instrument, in the main 

DIAGNOSTICS MENU

 

press 

[MORE]

 followed by 

[INITIALIZATION]

. Refer to 

Section 10: 

Troubleshooting and Diagnostics

; 

Subsection: 

Second 

Diagnostics Menu Screen

. To prime the instrument, press 

[RUN]

 

in the 

MAIN MENU

.

c. Move the rack that was under the Tower Cover to the starting position 

and remove all processed samples.

d. When the system has been initialized and primed, press 

[CHANGE 

SAMPLER]

 in the 

RUN

 menu to switch into the Closed Mode.

e. Press 

[START LOADER] 

to start processing samples.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды