manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 361

CELL-DYN

®

3200 System Operator’s Manual

8-1

9140181K—July 2002

Section 8

Hazards

Section 8 

Hazards

Overview

Operation, maintenance and servicing of automated hematology systems may 
expose individuals to potential safety and health hazards. All work must be 
performed as described in the CELL-DYN Operator’s Manual or as directed by an 
Abbott Representative.

This section provides precautionary warnings and information necessary for the 
safe use of the CELL-DYN 3200 System. Supplementary warnings are inserted 
throughout this manual and on the instrument to alert personnel to potential 
hazards. Whenever hazard symbols are encountered on the instrument, users must 
consult the Operator’s Manual to determine the nature of the potential hazard and 
actions that must be taken.

The standard warning conventions including signal words (e.g., caution) and 
symbols are described below. Safety symbols appear next to signal words that 
identify hazards.

Warning Conventions

Signal Words

DANGER:

Denotes an immediate hazard which, if not avoided, could result in 
serious injury or death.

WARNING:

Denotes a hazard which, if not avoided, could result in moderate to 
serious injury.

CAUTION:

Denotes a potential hazard that could result in injury. Also, used for 
conditions or activities which could interfere with proper func-
tioning of the instrument.

NOTE:

Denotes special operator/service information or standard practices.

Symbols

The general hazard symbol identifies an activity or area that may present a 
hazard to personnel or equipment.

The electrical hazard symbol alerts personnel to the possibility of electrical 
shock if procedural or engineering controls are not observed.

The biohazard symbol identifies an activity or area where personnel may be 
exposed to infectious substances if procedural or engineering controls are 
not observed.

The laser hazard symbol identifies an activity or area where personnel will 
be exposed to an eye hazard if procedural or engineering controls are not 
observed.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды