manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 248

5-96

CELL-DYN

®

3200 System Operator’s Manual

9140181H—October 2001

Operating Instructions

Sample Analysis on the CELL-DYN 3200CS

Section 5

Closed Mode Procedure

1. Be sure that the green READY light on the Analyzer Status Indicator Panel 

is illuminated and 

READY

 is displayed in the Status Box on the 

RUN

 

screen.

2. If necessary, in the 

581

 

screen press 

[CHANGE SAMPLER]

 to select the 

Closed Mode.

3. With the stopper still in the tube, mix the sample well (invert the tube a 

minimum of 5 times to thoroughly mix the sample).

4. Place the well-mixed sample, with the stopper facing up, into the Tube 

Holder and push the door closed.

NOTE:

The Touch Plate will not operate if the door has not been closed. 

5. Press the Touch Plate located behind the probe to start the cycle. The yellow 

BUSY light on the Analyzer Status Indicator Panel is illuminated.

6. Remove the tube when the door opens. A beep sounds when the door opens.

NOTE:

The door automatically opens whenever a sample has been 
aspirated in the Closed Mode or a background count has been run 
in Open Mode. There is also a tab under the Door Assembly that 
mechanically releases the door. This tab can be used if the door is 
closed and no tube is in the holder. The door will not open if the 
needle is in the tube. In case of an emergency stop, the operator will 
have to remove the Tower Cover and manually raise the needle out 
of the sample.

7. When the cycle is finished, the green READY light on the

Analyzer Status 

Indicator Panel is illuminated and the results are displayed on the 

RUN

 

screen.

NOTE:

Another sample may be aspirated at this point even though 

READY

 

is not displayed in the Status Box on the screen. Generally, the 
READY light on the Analyzer Status Indicator Panel will be 
illuminated before the Status Box on the screen displays 

READY

. 

8. Repeat this procedure for subsequent samples.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды