manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 205

CELL-DYN

®

3200 System Operator’s Manual

5-53

9140181H—October 2001

Section 5

Operating Instructions

5.

PRINT LIMITS REPORT

When this option is enabled, the Patient Limits set that was applied to the 
results is printed on the report.

6.

PRINT SPECIFIC ALERTS

When this option is enabled, the specific flag (BANDS, LRI, etc.) replaces 
the “AL” on the printout.

7.

PRINT MANUAL DIFFERENTIAL GRID FOR ALERTED SPECIMENS

When this option is enabled, a grid that can be used to report a manual 
Differential is printed on the report for any specimen that is flagged.

8.

PRINT MANUAL DIFFERENTIAL GRID FOR NON-ALERTED 

SPECIMENS

When this option is enabled, a grid that can be used to report a manual 
Differential is printed on the report for any specimen that is not flagged.

9.

LINE-FEEDS PER PAGE FOR TICKET PRINTER (1 to 99)

This option is used to select the size of the printed report. (A blank ticket 
typically has 68 lines.)

10. NUMBER OF LINES FOR THE CUSTOMIZE TICKET HEADER 

(0 to 2)

This option is used to select the number of lines for the header on the blank 
ticket. The numbers across the top of the header can be used to center the 
header information on the ticket. Centering the information under the number 
2 centers it on the ticket.

To Customize a Blank Ticket

1. If the Blank Ticket section of the 

CUSTOMIZE PRINTED REPORT

 

screen is not 

displayed, press

[BLANK TICKET]

.

2. Use the Arrow keys on the keyboard to move the cursor to the desired 

selection.

3. Press 

[TOGGLE ON/OFF]

 to enable or disable the selection.

4. Repeat step 3 until all ON/OFF selections have been made.
5. A numeric entry is required for the 

LINE-FEEDS PER PAGE FOR 

TICKET PRINTER

 field (A blank ticket typically has 68 lines) and the 

NUMBER OF LINES FOR THE CUSTOMIZE TICKET HEADER

 field.

6. Type the desired number of line-feeds in the entry field and press the Enter 

key on the keyboard to save the entry and advance the cursor.

7. Type the desired number of lines for the header (a maximum of 2 lines) and 

press the Enter key on the keyboard to save the entry and advance the cursor 
to the header box field.

8. With the cursor in the header box, type the first line of the header and press 

the Enter key on the keyboard to save the entry and advance the cursor. Each 
line holds 35 characters. If desired, type a second line and press the Enter key 
on the keyboard to save the entry and advance the cursor.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды