manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 396

9-26

CELL-DYN

®

3200 System Operator’s Manual

9140181H—October 2001

Service and Maintenance

Monthly Maintenance Procedures

Section 9

6. Pinch off the tubing above the luer slip inlet with hemostats. 

Clamp the 

tubing above the Diluent/Sheath Filter.
NOTE:

Be sure not to damage the luer slip inlet port.

7. Disconnect the luer slip inlet from the used Diluent/Sheath Filter.

NOTE:

Use a paper towel to absorb any liquid discharged from the filter or 
tubing.

8. Connect the luer slip inlet to the top of a new Diluent/Sheath Filter.
9. Disconnect the used Diluent/Sheath Filter from the silicon tubing at the lower 

end and discard it.

10. Attach the silicon tubing to the lower part of the new Diluent/Sheath Filter.

11. Remove the hemostats.

12. Install the new Diluent/Sheath Filter into the spring clip.
13. Turn the Power Switch ON.
14. Wait until the instrument is initialized, then press 

[RUN]

 to prime the system 

and place it in the READY state.

15. Run background cycles until the background reading is within specification, 

usually five to ten cycles. Refer to Section 4 for the background specification.

16. Record the completion of this procedure in the maintenance log.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды