manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 176

5-24

CELL-DYN

®

3200 System Operator’s Manual

9140181H—October 2001

Operating Instructions

Set Up Instructions

Section 5

Figure 5.8 QC Means/Limits Entry Screen

Means/Limits Entry

1. Select a file from the 

QC SET UP MENU

 

screen by using the Arrow keys on 

the keyboard to move the cursor into the desired file.

2. Press 

[QC LIMITS]

 followed by

[MEANS/LIMITS]

to display the 

QC MEANS/

LIMITS ENTRY

 

screen for the selected file 

[MEANS/LIMITS]

and 

[RANGE ENTRY]

.

3. Use the Arrow keys on the keyboard to move the cursor to the desired entry 

field.

4. Type the numbers and press the Enter key on the keyboard to save each entry 

and advance the cursor to the next entry field.

5. Repeat step 4 until all entries have been made.
6. If desired, press 

[PRINT]

 to obtain a printout of the entered values.

7. Press

[RETURN]

 to save the entries and return to the 

QC SET UP

 

screen.

NOTE:

When the entries are saved by pressing the 

[RETURN]

 soft key, the 

software checks to see if any entries would result in a negative 
number for the lower limit (e.g., mean = 1.0, limit = 2.0). If a 
negative number is found, the values are automatically edited to 
adjust the lower limit to zero. The bulletin line displays the 
message:

LIMITS WERE CHANGED TO CORRECT OUT-OF-RANGE VALUES.

In the above example, the mean would be adjusted to 1.5 and the limit would be 
adjusted to 1.5.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды