manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 203

CELL-DYN

®

3200 System Operator’s Manual

5-51

9140181H—October 2001

Section 5

Operating Instructions

To Customize the Graphics Header

1. From any 

CUSTOMIZE PRINTED REPORT

 screen, press 

[CUSTOMIZE HEADER]

to display the

 CUSTOMIZE PRINTOUT HEADER

 screen. Use the Arrow keys to 

skip a field.

2. Type the desired number of lines for the header in the indicated field. The 

header can include up to four lines.

3. Press the Enter key on the keyboard to save the entry and advance to the next 

entry field.

4. Press 

[TOGGLE ON/OFF]

 to enable or disable the 

PRINT CURRENT DATE/

TIME AND SOFTWARE VERSION

 option.

5. In the header box field, type the information to be displayed on the first line 

of the header. Each line holds 77 characters. Press the Enter key to move to 
the next header line.

NOTE:

The number of lines of data in the header box cannot exceed the 
number of lines indicated in the first field. For example, if 3 were 
input in the first field, then a maximum of 3 lines will be accepted 
in the header box. The operator may type in 4 lines of data, but only 
the first three lines will be saved when the operator exists this 
screen. (Existing information may be typed over or an existing 
header may be deleted by pressing the

[BLANK HEADER]

 key.)

NOTE:

The numbers displayed above the header box on the screen indicate 
the position of the header on the printed page. For example, 
centering the header/information under the number 4 centers the 
header on the page. Each line can be positioned independently of 
the other lines in the header box. Use the Space Bar on the 
keyboard to position the cursor for typing.

6. Press 

[SET UP]

 to return to the 

SET UP MENU

 

screen.

Ticket Printer

Two options are available when the 

[TICKET PRINTER]

 key is pressed:

BLANK TICKET/
PRE-PRNTD TICKET

(The key alternates between the selections.)

The 

[PRE-PRNTD TICKET] 

key is used to customize the printed report for a 

pre-printed ticket. The 

[BLANK TICKET]

 key is used to customize the printed report 

for a blank ticket.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды