manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 476

10-42

CELL-DYN

®

3200 System Operator’s Manual

9140181H—October 2001

Troubleshooting and Diagnostics

Tables for Instrument Conditions and Messages

Section 10

Printer (Graphics or Ticket) Unavailable/SB

– – –  - Probable  Cause – – – –

– – –  - Corrective  Action – – –

1. The print buffer (the memory area 

where the information is stored 
while awaiting printing) is full.

1. Press the 

[STOP PRINTING] 

key on 

the

 CUSTOMIZE PRINTED REPORT

 

screen for the appropriate printer.

2. The printer is turned OFF.

2. Turn the printer power switch ON.

3. The printer is not on-line.

3. Check that the printer “on-line” 

indicator is illuminated. If 
necessary, refer to the printer 
manual for assistance.

4. The power cord is loose or 

disconnected. The interface cable is 
loose or disconnected.

4. Check the power cable connection 

on the printer and power outlet. 
Make sure the connections are 
secure. Check the interface cable 
connectors on the printer and 
Analyzer. Make sure the 
connections are secure. Press 

[PRINT REPORT]

. If the message is 

still displayed, turn the printer 
power switch OFF and ON to reset 
the printer.

5. Printer cable is connected to the 

wrong port.

5. Ensure that the graphics printer 

cable is attached to the graphics 
printer port (LPT1) and the ticket 
printer cable is attached to the ticket 
printer port (LPT2).

Table 10.2 General Fault Conditions (Continued)

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды