manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 204

5-52

CELL-DYN

®

3200 System Operator’s Manual

9140181H—October 2001

Operating Instructions

Set Up Instructions

Section 5

Figure 5.24 Customize Printed Report Screen for Blank Tickets

Blank Ticket

When the 

[BLANK TICKET]

 key is pressed, the

CUSTOMIZE PRINTED REPORT

 

screen 

for blank tickets is displayed. The following options are available:

1.

TICKET PRINTER — BLANK TICKET

When this option is enabled, the ticket printer is configured for a blank ticket. 
(The pre-printed ticket option is automatically turned OFF.)

2.

AUTO-PRINT RESULTS FOR ALERTED SPECIMENS

When this option is enabled, a ticket is automatically printed for any sample 
with flagged results. Flagged results are indicated by the letters “AL” (for 
alert) on the printout when the 

PRINT SPECIFIC ALERTS 

option is 

turned OFF (see number 6 below). Results that exceed Patient Limits are 
underlined on the printout.

3.

AUTO-PRINT RESULTS FOR NON-ALERTED SPECIMENS

When this option is enabled, a report is automatically printed for any sample 
without flagged results.

4.

PRINT PCT, PDW RESULTS 

When this option is enabled, the results for PCT and PDW are printed on the 
report.

NOTE:

Clinical significance has not been established for these parameters. 
Therefore, they are not reportable.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды