Abbott CELL-DYN 3200 Скачать руководство пользователя страница 167

Страница: 167 / 684

CELL-DYN

3200 System Operator’s Manual

5-15

9140181H—October 2001

Section 5

Operating Instructions

To Set Date/Time

1. From the

SET UP MENU

screen, press

[DATE/TIME]

to display the

DATE/TIME

SET UP

screen.

2. Type the number of the desired format at the cursor.
3. Press the Enter key on the keyboard to save the entry and advance to the

DATE entry field.

4. Type the date in the selected format using one or two digits. Separate the day,

month and year (year must be 4 digits) with a slash (/) or a period (.). The
entry order of the date should conform to the date format just selected.

5. Press the Enter key on the keyboard to save the entry and advance to the

TIME entry field.

6. Type the time in the 24-hour (military) time format using one or two digits.

(For example, 00 for 12 midnight, 06 for 6 am, and 13 for 1 pm.) Separate the
hours and minutes with a colon (:) or a period (.).

7. Press the Enter key on the keyboard to save the entry.
8. Press

[RETURN]

to return to the

SET UP MENU

screen.

Figure 5.4 Patient Limits Screen

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CELL-DYN 3200

Отзывы:

Бренды по названию

Популярные бренды

Abbott CELL-DYN 3200, Руководство оператора системы

Результаты поиска

Содержание CELL-DYN 3200

Отзывы:

Бренды по названию

Популярные бренды