Abbott CELL-DYN 3200, Руководство оператора системы

Страница: 209 / 684

CELL-DYN ® 3200 System Operator’s Manual
5-57
9140181H—October 2001
Section 5 Operating Instructions
To Customize the Display Screen
1. From the
SET UP MENU
screen, press
[CUSTOMIZE REPORT]
and if necessary,
press
[CUSTOMIZE DISPLAY]
to display a parameter set.
2. If desired, press
[PARAM SET “X”]
to select a different parameter set.
3. Use the Arrow keys on the keyboard to move the cursor to the desired
parameter in the list displayed on the left section of the screen.
4. Press
[TOGGLE PARAMETER]
to turn the display off or on and advance the
cursor to the next parameter. The cursor moves through the entire list of
parameters in this section of the screen and, when at the bottom, returns to
the top of this list.
NOTE: The
[TOGGLE PARAMETER]
key is displayed only when the cursor
is positioned in the list of individual parameters displayed on the
left side of the screen.
5. Repeat steps 3 and 4 until all parameter selections have been made. Use the
Right Arrow key to move the cursor to the next section.
6. Use the Arrow keys to move the cursor to the desired scatterplot or
histogram.
7. Press
[SELECT GRAPH]
to select it. The scatterplot or histogram name is
highlighted and the cursor moves to a display position. The key label changes
to
[PLACE GRAPH]
and the
[CANCEL GRAPH]
key is displayed.
8. If necessary, use the Arrow keys on the keyboard to move the cursor to the
desired display position.
9. Press
[PLACE GRAPH]
to display the selection at the indicated position. The
cursor moves to the next scatterplot or histogram in the list.
10. Repeat steps 6 through 9 until all selections have been made for the current
Parameter Set.
11. If desired, press the Print Screen key on the keyboard to obtain a printout of
the selected Parameter Set.
12. Press
[PARAM SET “X”]
to select another Parameter set and repeat steps 3
through 11 to customize the display for it.
13. Press
[SET UP]
to return to the
SET UP MENU
screen.