manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 389

CELL-DYN

®

3200 System Operator’s Manual

9-19

9140181H—October 2001

Section 9

Service and Maintenance

Weekly Maintenance Procedures

WARNING:  Potential Biohazard.  

Wear gloves, lab coats, and safety 

glasses and follow other biosafety practices as specified in the OSHA 
Bloodborne Pathogen Rule (29 CFR Part 1910.1030) or other equivalent 
biosafety procedures. 

Sample Loader and Racks

The Sample Loader surface areas and racks should be cleaned on a regular basis. 
Blood spills in the Sample Loader track or racks should be cleaned up immediately 
to allow proper movement of the racks. Weekly cleaning is recommended when the 
Sample Loader is used, but more frequent cleaning may be indicated by the 
laboratory workload.

Materials Required

1. Container (large enough to hold a rack) filled with a mild detergent solution 

made with warm (not hot) water

2. Clean, warm water for rinse
3. DYN-A-WIPE

 

Lint-free pads (or other lint-free pads)

4. Gloves, lab coat, and safety glasses.

Procedure

1. Remove the racks from the Sample Loader.
2. Wash the racks in the detergent solution. Do not allow them to soak in the 

solution because the labels will come off.

NOTE:

Do not wash the racks in an automated dishwasher that operates at 
high temperatures because the heat may damage the racks.

3. Rinse the racks with warm water and dry thoroughly with a DYN-A-WIPE 

(or other lint-free pad).

4. Wipe the Sample Loader with a lint-free wipe moistened with water. Dry it 

with a DYN-A-WIPE

 

(or other lint-free pad).

5. Wipe the sides of the Sample Loader with a lint-free wipe moistened with 

detergent solution. Wipe off the detergent solution with a lint-free wipe 
moistened with water. Dry the sides with a DYN-A-WIPE

 

(or other lint-free 

pad).

Sample Transfer Pump Tubing Check 

Constant pressure on the tubing under the Peristaltic Pump Wheel tends to flatten 
the tubing, thereby inhibiting the flow of liquid past the pump. This tubing should 
be checked at least weekly to ensure it is maintaining its original shape. Replace 
the tubing after 2000 cycles or as necessary (refer to the Peristaltic Pump Tubing 
Replacement procedure in 

Subsection:

 

Nonscheduled Maintenance Procedures

).

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды