Abbott CELL-DYN 3200 Скачать руководство пользователя страница 541

Страница: 541 / 684

CELL-DYN

3200 System Operator’s Manual

11-11

9140181H—October 2001

Section 11

Quality Control

Figure 11.8 QC Log Screen With Rejected Results

When the

[ACCEPT SPECIMEN]

key is pressed, the “R” is deleted and the statistics

are recomputed including those results.

Delete Specimen

The

[DELETE SPECIMEN]

key is used to delete the results for the specimen indicated

by the cursor position. When the

[DELETE SPECIMEN]

key is pressed, the following

key labels are displayed:

CONFIRM DELETION
CANCEL DELETION

These keys are used to

[CONFIRM]

[CANCEL]

the delete command. When the

[CONFIRM DELETION]

key is pressed, the results are deleted from the file (the data

is not displayed or stored in the file) and the statistics are recomputed excluding
those results.

Move Specimen

The

[MOVE SPECIMEN]

key is used to move a QC result indicated by the cursor

position to another QC file. When the

[MOVE SPECIMEN]

key is pressed, the

screen is displayed, allowing the desired file to be selected. When the

[MOVE TO FILE]

key is pressed, the result is moved to the indicated file.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание CELL-DYN 3200

Отзывы:

Бренды по названию

Популярные бренды

Abbott CELL-DYN 3200, Руководство оператора системы

Результаты поиска

Содержание CELL-DYN 3200

Отзывы:

Бренды по названию

Популярные бренды