Abbott CELL-DYN 3200, Руководство оператора системы

Страница: 537 / 684

CELL-DYN ® 3200 System Operator’s Manual
11-7
9140181H—October 2001
Section 11 Quality Control
View QC Log
The
[VIEW QC LOG]
key is used to display the QC Log indicated by the position of
the cursor.
Figure 11.5 The View QC Log Screen
Each QC Log display shows the following information (see Figure 11.5):
1. Upper Left Corner
L
OT NUMBER
and
EXPIRATION DATE
if the file was configured for this
type of control. If the file was configured for a
REPLICATE ID
, it is
displayed instead of the lot number and expiration date.
File name, the number of runs currently in the file and the file capacity
(e.g.,
39/120
indicates that the file contains
39
runs out of a possible
120
).
The page number of the display and the total number of pages in the file.
2. Status Box
USE < OR > FOR MORE DATA
. This message indicates that the Left and
Right Arrow keys on the keyboard should be used to display the other groups
of data.
3. Upper Right Corner
The current
DATE, TIME
and
OPERATOR ID
are displayed along with the
last
SEQUENCE NUMBER
that was used.