manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 196

5-44

CELL-DYN

®

3200 System Operator’s Manual

9140181K—July 2002

Operating Instructions

Set Up Instructions

Section 5

NOTE:

Auto-transmitting extended data uses CPU time during the acquisition 
cycle. In order to reduce the time taken by this transmission, auto-
transmission of extended data is only allowed at the baud rates of 38400 and 
56000. If there is a need to re-transmit data, this can be done one specimen 
at a time from the DISPLAY SPECIMEN menu if the correct baud rate has 
been selected and transmission of either extended histograms or extended 
scatter plots has been selected.

Computer Set Up Procedure

1. From the 

OPERATION SET UP MENU

, press

[COMPUTER SET UP]

 to display 

the 

COMPUTER SET UP

screen.

2. For the first five options on the list, use the Arrow keys on the keyboard to 

move the cursor to the desired selection and press

 [TOGGLE ON/OFF] 

to enable 

or disable the selection.

NOTE:

The 

[TOGGLE ON/OFF]

key is displayed when the cursor is 

positioned in any of the first five entry fields.

3. For the last five options on the list, type the appropriate information and press 

the Enter key on the keyboard to save the entry and advance the cursor.

4. When all the information has been entered, press 

[REINIT INTERFACE]

to 

initialize the interface for the selected configuration.

5. If desired, press the Print Screen key on the keyboard to obtain a printout of 

the configuration.

6. Press

[SET UP]

 to return to the 

OPERATION SET UP MENU

screen.

7. Press 

[RETURN]

 to return to the 

SET UP MENU

.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды