manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 207

CELL-DYN

®

3200 System Operator’s Manual

5-55

9140181H—October 2001

Section 5

Operating Instructions

2.

AUTO-PRINT RESULTS FOR ALERTED SPECIMENS

When this option is enabled, results for flagged specimens are automatically 
printed as tickets are inserted in the printer. Flagged results are marked with 
an asterisk (*).

3.

AUTO-PRINT RESULTS FOR NON-ALERTED SPECIMENS

When this option is enabled, results for specimens that are not flagged are 
automatically printed as tickets are inserted in the printer.

4.

PRINT PCT, PDW RESULTS

When this option is enabled, the PCT and PDW are printed on the ticket.

NOTE:

Clinical significance has not been established for these parameters. 
Therefore, they are not reportable.

To Customize the Pre-Printed Ticket

1. Go to the Ticket Printer - Pre-printed Ticket section of the 

CUSTOMIZE 

PRINTED REPORT

 

screen

 

(refer to Figure 5.25).

2. Use the arrow keys on the keyboard to move the cursor to the desired option.
3. Press

 [TOGGLE ON/OFF]

 to enable or disable the selected option.

4. Repeat steps 2 and 3 until all selections have been made.
5. If desired, press the Print Screen key on the keyboard to obtain a printout of 

the selections.

6. Press 

[SET UP]

 to return to the 

SET UP MENU

 

screen.

Customize Displayed Report

Customized displays can be established for each of the four parameter sets. The 

CUSTOMIZE DISPLAYED REPORT 

screen (see Figure 5.26) for the indicated 

parameter set (in this case PARAM SET 1) and the following soft key labels are 
displayed when the 

[CUSTOMIZE DISPLAY]

 key in the 

CUSTOMIZE PRINTED 

REPORT 

screen is pressed:

PARAM SET 1*
PARAM SET 2*
PARAM SET 3*
PARAM SET 4*
CUSTOMIZE PRINTOUT
CUSTOMIZE HEADER/
CANCEL GRAPH

(The key label alternates between the selections.)

SELECT GRAPH/
PLACE GRAPH

(The key label alternates between the selections.)

SET UP

*The soft key for the displayed parameter set is blanked out.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды