manualshive.com logo in svg

Abbott CELL-DYN 3200, Руководство оператора системы

Поделиться
Скачать
Abbott CELL-DYN 3200 Скачать руководство пользователя страница 357

CELL-DYN

®

3200 System Operator’s Manual

7-1

9140181K—July 2002

Section 7

Operational Precautions and Limitations

Section 7 

Operational Precautions and Limitations

Overview

This section deals with the precautions that need to be taken to ensure the 
performance and validity of the CELL-DYN 3200 System and its test results.

The following system precautions and limitations are reviewed in this section:

• General Limitations
• Location Requirements
• Reagent Storage and Handling
• Printer Precautions

Limitations

The CELL-DYN

 

3200 System is designed for in vitro diagnostic use.

• Abbott has designed the CELL-DYN 3200 System components for optimal 

performance. Substituting reagents, calibrators, controls, and components 
manufactured by other companies may adversely affect the performance of 
the instrument.

• Follow the recommended maintenance schedules and procedures as outlined 

in 

Section 9: 

Service and Maintenance

.

• During the warranty period, all service and repair must be performed by 

Abbott-authorized representatives.

Location Requirements

The location of the CELL-DYN 3200 System is an important consideration that 
affects proper instrument functioning, operating safety, and ease of use.

• An Abbott-authorized representative must install the instrument.

• The location should have nonporous, nonabsorbing work surfaces and 

flooring that can be cleaned easily and disinfected using recommended 
procedures.

• Place the CELL-DYN 3200 System on a hard, level surface. Locate the 

system:

– away from direct sunlight.

– away from the path of a cooled air or heated air outlet.

– away from other instruments that may interfere with the 

CELL-DYN 3200 System, such as drying ovens, centrifuges, x-ray 
equipment, MRI (magnetic resonance imaging) equipment, CRTs or 
computers, video terminals, copiers, ultrasonic cleaners, and patient 
areas. Please note that the CELL-DYN 3200 System has been evaluated 
to EN55011 and EN61000 for electromagnetic emissions and immunity, 
respectively.

Содержание CELL-DYN 3200













































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды