![background image](http://html1.mh-extra.com/html/zeiss/humphrey-hfa-ii-i-series/humphrey-hfa-ii-i-series_field-service-manual_3332218513.webp)
Page 6
FA2i-045A
Mounting the HFA to the Power Table Instructions
Tools & Hardware Required
•
3mm Allen (Hex) wrench, P/N 30984-3
•
Screw M4x40 SOC HD CAP S/BZ, P/N 28295-40 (2 included w/table)
•
Washer M4 Square Cone, P/N 14445 (2 included w/table)
1) With the instrument on the floor, remove the two feet as shown in Figure 7 from the bottom of the HFA by
removing the two screws securing them to the instrument. (Save the 2 removed screws for future use)
Figure 7 Remove the Two Feet from the Instrument
2) Put the two feet that were removed in step 1 onto the table as shown in Figure 8 and place the
instrument on top of the table.
Figure 8 Place Feet and Instrument on Top of Table
Summary of Contents for humphrey HFA II-i series
