![background image](http://html1.mh-extra.com/html/zeiss/humphrey-hfa-ii-i-series/humphrey-hfa-ii-i-series_field-service-manual_3332218167.webp)
Humphrey Field Analyzer II - i
Troubleshooting
Confidential and Proprietary
52235C1105
5 - 17
Field Service Guide
System startup state 1
- Get ROM ID - there has been a mismatch of revision levels.
Recommended Action:
• Cycle power to restart
• Install the most current revision of software
• Replace motor driver PCB
System startup state 2
- Get Status - the ROM self-check failed
Recommended Action
:
• Cycle power to restart
• Install the most current revision of software
• Replace motor driver PCB
System startup state 3
- Resets motors - All motors have failed to detect their flags
Recommended Action
:
• Cycle power to restart
• Check System Log (Appendix J.3) for repetitive motor failures
• Visually inspect Motors, Flags, and Edge Detectors for misalignment. The Motor exerciser
function can also be used to diagnose motor failures. Adjust as necessary. If failure
cannot be traced to a particular Motor, flag, or detector check/replace motor driver PCB
or connections.
System startup state 4
- Set motor flag parameters - a motor or edge detector have failed.
Recommended Action
:
• Cycle power to restart
• Check System Log (Appendix J.3) for repetitive motor failures
• Visually inspect Motors, Flags, and Edge Detectors for misalignment. The Motor exerciser
function can also be used to diagnose motor failures. Adjust as necessary.
• Refer to Common Error Messages (Section 5.10)
• If failure cannot be traced to a particular Motor, flag, or detector check/replace motor
driver PCB or connections.
System startup state 5
- Set motor rates - A motor did not respond properly.
Recommended Action
:
• Cycle power to restart
• Check System Log (Appendix J.3) for repetitive motor failures
• Visually inspect Motors, Flags, and Edge Detectors for misalignment. The Motor exerciser
function can also be used to diagnose motor failures. Adjust as necessary.
• If failure cannot be traced to a particular Motor, flag, or detector check/replace motor
driver PCB or connections.
Summary of Contents for humphrey HFA II-i series
