![background image](http://html1.mh-extra.com/html/zeiss/humphrey-hfa-ii-i-series/humphrey-hfa-ii-i-series_field-service-manual_3332218503.webp)
ÚÚÚ
PROPRIETARY and CONFIDENTIAL
ÚÚÚ
SERVICE
BULLETIN
Instrument:
Humphrey Field Analyzer II-i
No.:
FA2i-042A
Subject:
New Motor Driver Board (P/N 63710)
Date:
30 Jul 07
Status:
Informational
Pages:
1
This bulletin replaces Service Bulletin FA2i-042
General Information
A new HFA II-i Motor Driver board (P/N 63710) has been released.
The current Motor Driver board (P/N 61190) has logic level incompatibilities between the 3.3 volt devices
and microprocessor, which runs on 5.0 volts. The logic levels rarely affected the operation of the
instrument, but in some cases the unit will not boot up to the main menu.
The new Motor Driver board (P/N 63710) can be used as a replacement for the previous Motor Driver
boards used in the HFA II-i.
Motor Driver Board Compatibility
Please observe the following when ordering or replacing a Motor Driver board:
Motor Driver board: Replacement For:
Software Version Needed:
P/N 63710
P/N 61190 or 48530-3
Requires Version 4.1 or greater
P/N 61190
No longer issued
Requires Version 4.1 or greater
P/N 48530-3
P/N 63710, 61190, or 48530-3
Works with all versions of software
Post Replacement Procedures
After installing a new Motor Driver board, ensure that you follow the steps outlined in Table 3.1 of the
HFA II-i Field Service Guide.
Summary of Contents for humphrey HFA II-i series
