Zeiss humphrey HFA II-i series, Field Service Manual

Page: 339 / 521

Humphrey Field Analyzer II - i Appendix R
Confidential and Proprietary
52235C1105 R - 1
Field Service Guide
Appendix R. Optional Software Installation
A customer may be provided or purchase an optional software package. A current
example of an optional software package is the Kinetic software package for
740i
instruments. Other optional software packages may be developed in the future. The
optional software will be provided on a 3 ½" floppy disk and installed via the floppy
drive.
The floppy disk will load and enable the instrument to run the optional software. Prior to
loading the optional software, you should print the current software options in the “
i ”
screen. After loading the software options you should verify that the options are enabled
in the “
i ”screen. Additionally, you should verify that the options appear in the menus
and are functional.
Loading the Software Options
1) Set instrument power to ON.
2) At the Main Menu, select System Setup .
3) Select Additional Setup .
4) Select Install Software .
5) You will see a “ Insert an HFA Option Floppy Disk, then Press OK to begin
installation” . Press OK .
6) A dialogue with “ Installing nnn, press OK to continue” will appear. Nnn indicates
the software option that you are loading. In case of the Kinetic option, the nnn will be
replaced with “ HFA II Kinetic Tests 51123.A1?”
Select Continue .
7) “Optional Software Installation in Progress...” dialogue will appear. It will soon be
replaced with “Option software installation successful” . Press OK .
8) Verify that the option is enabled by selecting it and using it.