Zeiss humphrey HFA II-i series, Field Service Manual

Page: 434 / 521

Page 4 FA2i-017E
RAS Timing Slow
RAS Precharge Timing Slow
Watch Dog Timer Control Disabled
Watch Dog Timer Setting 8 sec.
CMOS RAM CLEAR FUNCTION Enabled
Power Management Set-up
ACPI Aware O/S No
ACPI Standby State S1/POS
Power Management /APM Disabled
Video Power Down Mode Disabled
Hard Disk Power Down Mode Disabled
Standby Time Out (Minute) (N/A)
Suspend Time Out (Minute) (N/A)
Throttle Slow Clock Ratio 50.0%
Keyboard & PS/2 Mouse Access Monitor
FDC/LPT/COM Ports Access Monitor
Primary Master IDE Access Monitor
Primary Slave IDE Access Ignore
Secondary Master IDE Access Ignore
Secondary Slave IDE Access Ignore
PIRQ [A] IRQ Active Ignore
PIRQ [B] IRQ Active Ignore
PIRQ [C] IRQ Active Ignore
PIRQ [D] IRQ Active Ignore
Power Button Function On/Off
Resume On Ring Disabled
Resume On PME Disabled
Resume On RTC Alarm Disabled
RTC Alarm Date 15
RTC Alarm Hour 12
RTC Alarm Minute 30
RTC Alarm Second 30
Plug and Play Setup
Plug and Play Aware O/S No
Clear NVRAM No
PCI Latency Timer (PCI Clocks) 64
Primary Graphics Adapter Add-on VGA
PCI VGA Palette Snoop Disabled
PCI IDE BusMaster Disabled
PCI Slot1 IRQ Priority Auto
PCI Slot2 IRQ Priority Auto
PCI Slot3 IRQ Priority Auto