![background image](http://html1.mh-extra.com/html/zeiss/humphrey-hfa-ii-i-series/humphrey-hfa-ii-i-series_field-service-manual_3332218515.webp)
ÚÚÚ
PROPRIETARY and CONFIDENTIAL
ÚÚÚ
SERVICE
BULLETIN
Instrument:
Humphrey Field Analyzer II-i
No.:
FA2i-046
Subject:
New Edge Detectors for Projection Assembly
Date:
25 Apr 08
Status:
Informational
Pages:
3
General Information
The current edge detector assemblies used with the film and glass wedges and the Y turret motor are
obsolete.
New edge detector assembly part numbers have been created and released. The new edge detector
assemblies are backward compatible on all HFA II-i units.
The new HFA II-i detector assemblies are defined in
Table 1
below.
Edge Detector Usage
Table 1. New Edge Detector Usage
Detector Part
Number
Where Used
P/N 67418
Y Turret assembly
P/N 67417
Film (J) and glass (I) wedge assemblies
Both of the new detector assemblies contain a 0.060 inch thick spacing washer to correctly position the
detector. See
Figure 1
and
Figure 2
for washer placement.
Replacement Procedures
Ensure that you place the spacing washer in the correct position as indicated in
Figure 1
and
Figure 2
during assembly of the detectors.
Note –
Improper spacing washer placement can create motor calibration errors.
Summary of Contents for humphrey HFA II-i series
