![background image](http://html1.mh-extra.com/html/zeiss/humphrey-hfa-ii-i-series/humphrey-hfa-ii-i-series_field-service-manual_3332218088.webp)
Parts Removal/Replacement
Humphrey Field Analyzer II - i
Confidential and Proprietary
Field Service Guide
3 - 42
52235C1105
3.31 Turret Cable Assembly Removal
Replacement Notes:
P
If a turret cable requires replacement, all three cables must be replaced as an
assembly.
Caution —
Before removal of the old cable assembly, carefully note
cable routing and taping. Failure to properly install the turret cable
assembly will cause turret binding and turret noise.
Follow-up Checks/Adjustments:
See Table 3-1.
3.32 Chinrest/Headrest Switch Assembly Removal
1)
Remove the operator panel (3.4).
2)
Remove the three screws securing the chinrest switch assembly bracket.
3)
Remove the chinrest switch assembly .
Replacement Notes:
Follow-up Checks/Adjustments:
See Table 3-1.
Summary of Contents for humphrey HFA II-i series
