![background image](http://html1.mh-extra.com/html/zeiss/humphrey-hfa-ii-i-series/humphrey-hfa-ii-i-series_field-service-manual_3332218439.webp)
ÚÚÚ
PROPRIETARY and CONFIDENTIAL
ÚÚÚ
SERVICE
BULLETIN
Instrument:
Humphrey Field Analyzer II-i
No.:
FA2i-021
Subject:
Change in Rear Cover and Rear Shield Design
Date:
13 Jun 03
Status:
Informational
Pages:
1
Problem
The old rear cover (P/N 51114) has been modified to enhance the fit of the cover, eliminating gaps
between covers. This change required a modification to the rear shield (P/N 51070 ).
The new rear cover (P/N 55995) will not fit properly on an old style instrument, unless the rear shield (P/N
51070) is also changed.
Solution
The new rear cover will fit properly on an old style instrument after changing the rear shield to the new
51070 rev B shield. It is also advisable to order a new connection diagram label (P/N 51674) to place on
the rear shie ld, rather than trying to remove the label from the old shield.
Instruments that have been manufactured with the new rear cover and new shield start with following
serial numbers:
720i-5836
740i-11430
745i-4562
750i-9421
Figure 1. Rear Shield with Diagram Label.
Rear Shield
Diagram Label
Summary of Contents for humphrey HFA II-i series
