Strata CIX 200, Programming Manual

Page: 473 / 508

Applications Guide
Strata CIX BRI Video Conferencing Programming
Strata CIX Programming Vol.1 12/09
A-5
Ap
pl
ication
s
Gu
id
e
Strata CIX BRI Video Conferencing Programming
The table below shows the programs required to program a PRI line to ring to a RBSU interface to allow for
Video Conferencing capabilities.
The following may differ in your system: card slot assignments, trunk groups, channel groups and BRI
station numbers.
The following program changes are required once the system has been installed and initialized.
Programs Description
Program 100
Card Assignment
RPTU and RBSU S/T Interface with each two TIE’s
Program 105
System Data
Field 21=RPTU card slot
Program 304
Incoming Line Groups
ILG=n, Field 01=ISDN, Field 02=CO, Field 03=DID, Field 04=Standard
Program 306
Outgoing Line Groups
OLG=n, Field 01=ISDN, Field 02=CO/DID, Field 03=Standard
Program 309
Direct Inward Dialing
ILG=n, Field 01=nxxx, Fields 05 through 10=Dialing Digits Type with Destination
Digits
Program 302
PRI Trunks
Channel Group=n, Field 01=Equip Nos, Field 02=Nat’l ISDN, Field 03=n, Field
04=n, Field 07=n, Field 08=Check, Field 09=Check, Field11=Check,
Field12=Check, Field 19=Check
Program 320
“B” Channels
Field 00=Equip Nos, Field 01 through 23=Check
Program 202
ISDN BRI Station
Prime DN=nnnn, Field 01=Equip No., Field 02=n, Field 03=Nat’l ISDN, Field
04=Point to Multi-Point, Field 13=Check, Field 14=Check
Note Field 02 must be a different channel group for each BRI station and cannot
conflict with PRI channel group.