Strata CIX 200, Programming Manual

Page: 316 / 508

IP Telephone Programming
IP Telephone Setup
8-2
Strata CIX Programming Vol.1 12/09
IP Telephone Data
IP-Telephony > IPT Data (250 IPT Data Assignment)
Note When using Station Terminal Authentication Mode it is recommended that the IP telephone be
plugged in and configured prior to executing this program. If the IP telephone is not configured and
present on the network the MAC Address must be entered manually. If the IP telephone is
configured and present on the network the MAC Address will be entered automatically.
field 00 Prime DN - Select the station from the list on the right
field 01
Station ID (will display automatically) - This will be the same as the PDN assigned in the Station
Data program.
field 02 Station IP Address type. Contact the network administrator for the type. ANY = DCHP, FIX = Static
field 03
Station IP Address
If FIXED enter the IP address
If ANY make no entry. (After the IP telephone is configured this will populate.)
field 04 Auto Assign Station ID - Set preference
field 05
Set Station Termination Authentication Mode
See note below
field 06
Station MAC Address
See note below
field 07 Voice Packet Table - default = 1
field 08
Audio Codec - Set to: G.711 or G.729
Note : SoftIPT 2.2 can only support G.711. SoftIPT 3.x supports both G.711 and G.729
field 09
Display Software Version Number of the IP telephone - This will display automatically if the IP
telephone is connected.