Strata CIX 200, Programming Manual

Page: 211 / 508

Station
Assignment
Strata CIX Programming Vol.1 12/09
5-7
St
a
tio
n
38 Tenant Number Enter the Tenant number to which this PDN should be assigned.
Possible values:1~ 8 (default = 1)
39 Hook-Switch Recall Enable Recall for Digital Telephones for normal operation.
Disable Recall on Standard Telephones that produce hook-switch bounce
when they are hung-up. This prevents annoying ring recalls when the user
hangs up on a call.
Possible values:Enabled or Disabled (default = Enabled)
40 Auto-Campon to PDN Enable - to allow auto-campon to this PDN when busy and called by a CO line
even if the CO line group has auto-campon disabled in Program 304-17.
Disable - to not allow auto-campon to this PDN when called by a CO line if the
CO line group has auto-campon disabled in Program 304-17.
Note
Auto-campon will always occur on the PDN if the calling CO line group has
auto-campon enabled in Program 304-17 regardless of how this option is set.
Auto-campon will be applied or not to PhDNs according to the PhDN owner
PDN setting for this option.
Possible values:Enabled or Disabled (default = Enabled)
41 LCR PDN Code Enter the number of digits that determine when to send the LCR PDN code.
The PDN code is registered in the LCR Modified Digits Table.
Possible values:G711, G729A or None (default = G729A)
42 Network Calling Number Enter the CLID telephone number that should be sent for this station when
making external calls through the Strata Net ISDN network (32 digits max.).
When this station makes outgoing calls through the Strata Net network this
number will be sent over the Strata Net network to the terminating PSTN
connected to the far-end node (providing this is allowed by the PSTN). This
number will be displayed as the Caller ID number at the terminating external
telephone. This number is not sent to local PSTNs connected to the node from
which the call is originated, nor is it sent when making conventional Tie line
calls that terminate on a PSTN at a far-end node.
Possible values:32 Digits Max.
43 Security Code Enter the My Phone Manager password for this station. This security code is
also the IP Mobility Login password (refer to field 49).
Possible values:16 Characters Max
44 My Phone Manager Level Enter the My Phone Manager user privilege level for this station.
Possible values:Normal, Super 1 or Super2 (default = Normal)
45 Speaker OCA Enable or disable Speaker OCA on an IP telephone. When speaker OCA is
assigned to an IP set an additional IP port is assigned to the IP. If there is no
available IP port S-OCA cannot be assigned and an eManager error will occur.
Possible values:Enabled or Disabled (Default)
Table 5-1 Station Assignment Data for IP, and SIP Telephones (Prog 260) (continued)