Strata CIX 200, Programming Manual

Page: 483 / 508

Applications Guide
Network Busy Lamp Field (BLF)
Strata CIX Programming Vol.1 12/09
A-15
Ap
pl
ication
s
Gu
id
e
•
07 Read Retry No. = 1
•
08 Write Retry No. = 1
•
09 CallerName Set To CSTA = No
Step 2:
From CIX Attendant Console Set up BLF Network
Important! Complete Step 1: “Program Network BLF from Network eManager for CIX Attendant
Console” on page A-14 before you begin the following steps.
1. Click Administration view.
2. Select the BLF Network Control tab.
3. Enter the IP addresses of primary and remote CIXs.
4. Enter the Port Number (6000).
5. In the Name field, enter the Node Identified. For example, names such as Dallas, Chicago, etc.,
depending on where the remote CIXs are located.
6. Enter the Refresh rate. This is the frequency that the software will poll the remote site.
7. Click Add .
8. Enter the data for the other nodes, then click OK .
Notes
•
When you make the directory in the CIX attendant console and when entering user information, add
the node ID as prefix to the extension.
•
When you start the CIX attendant console for the first time, a dialog box appears that requires the IP
addresses and port numbers of each CIX.
Network DSS/BLF for Digital Telephones
Follow these steps to program Network BLF/DSS as shown in Figure 4 :
Figure A-4 Network BLF Example
Important! See steps for programming Network BLF from Strata eManager on the following pages.