Software and Firmware Updates
IP Telephone, MIPU, GIPU, LIPU and BIPU Firmware Update Procedures
B-4
Strata CIX Programming Vol.1 12/09
5.
Select
Maintenance > IP Firmware Update > L/M/G/B IPU Update
a.
Select card type xIPU-X
b.
Select Cab/Slot of xIPU-X
c.
Select “SM/SD Media Card” as the FTP Server Information
d.
The User Name, Password, IP Address, and Data Directory fields will automatically populate with
the correct information.
e.
Use the drop down on the File Name field and select the xIPXXX file.
f.
Click the
Start
button
g.
The xIPU will be automatically disabled.
h.
When the update is completed successfully the xIPU will be reset.
Important!
The xIPU must be installed in the system, configured, and connected to the network. The
xIPUs and IP telephones will automatically be disabled while Update takes place and return
to the idle state when Update is complete.
IP Telephone Update
Important!
Complete all
before you do the following.
CAUTION!
Be sure that you are loading the update firmware to the correct device. Incorrect
firmware can cause the device to be inoperable. For example, BIPU firmware loaded
onto an LIPU will cause the LIPU card to stop functioning. This caution also applies to
IPTs. For example, loading IPT2000 firmware to an IPT2008 will cause the IPT2008 to
stop functioning. Restoration can only be done at a Toshiba TSD repair facility.
From the Network eManager PC or External SM/SD read\write device
1. Store the update files on the SM/SD card.
2.
“Force format” a SM/SD card using Network eManager.
3.
Copy the IP5 or DIP update file under the SM/SD card PROGRAM folder.
From the Network eManager PC perform the update
1. Select
Maintenance > SM/SD Card
. Check that the IPd or DIP file is stored on the SM/SD card under
the PROGRAM directory.
Important!
The xIPUs and IP telephones will automatically be disabled while Update takes place and
return to the idle state when Update is complete (if they were in the idle state when the
Update was started).
2.
Select
Maintenance > IP Firmware > IPT_L/M/G Update
. Select the IP telephone PDN to be
updated. Refer to the Cautions on
3.
Select CIX Internal (SM/SD) radio button.
4.
An ftp Name and Password is inserted automatically.
5.
The IP address of the CIX processor (SM/SD card) is inserted automatically.
6.
Data Directory box will be: PROGRAM
7. From File Name drop down box select: IP5 file or DIP file
8. Click
Start
and observe the update status: Getting Updated file\Updating\Finished
Updating\Resetting\idle.
Summary of Contents for CIX 200
