Strata CIX 200, Programming Manual

Page: 220 / 508

Station
Assignment
5-16
Strata CIX Programming Vol.1 12/09
36 Exclusive Hold Enable: If the user presses the Hold button twice in succession the
telephone places the current call on Exclusive Hold.
Disable: The telephone cannot place calls on Exclusive Hold.
Possible values:Enable or Disable (default = Enable)
37 Dial Directory -
Off Hook
Enable: Allows access to the telephone Dial Directory by going off-hook,
pressing the Spkr button or pressing the first softkey on the left side of the
LCD.
Disable: Denies access to the telephone Dial Directory by going off-hook or
pressing the Spkr button. User must press the first softkey on the left side
of the LCD to access the Directory Dial feature.
Note This option only applies to 7, 10, and 20 button telephones with
small LCDs.
Possible values:Enable or Disable (default = Disable)
38 Dial Directory -
Make Call
Enable: Allows user to originate a call by going off-hook, pressing the Spkr
button or pressing the CALL softkey after finding a name using the small
LCD telephone Dial Directory feature.
Disable: User must press the CALL softkey to originate a call using the
small LCD telephone Directory Dial feature. After finding a name, nothing
will happen when going off-hook or pressing the Spkr button.
Possible values:Enable or Disable (default = Disable)
39 LARGE LCD
PHONE
Select DP5130/IP5131 if this is a DP5130-SDL/IP5131-SDL or DP5130-
FSDL large LCD telephone with programmable LCD keys.
Note If this is a DP5130/IP5131 type telephone, 10 buttons must be
selected in parameter 03 of this program.
Select NOT DP5130/IP5131 for all other telephone types.
40 ADM1 - LCD
KEYSTRIP
Select LM5110 if Add-on-Module 1 is a LCD Line Module with
programmable LCD keys.
Select NOT LM5110 for all other KM or DDADM types
Possible values:1: Not LM5110 (Default)
2: LM5110
41 ADM2 - LCD
KEYSTRIP
Set this value to LM5110 if the add-on module 2 is an LCD line module with
programmable LCD keys.
Possible values:1: Not LM5110 (Default)
2: LM5110
To Remove an
LM5110 Add-on
Module To remove an LM module (ADM 1 or ADM2)
1.
Change FK 40 for ADM1, change FK 41 for ADM 2 to Not LM5110 -
then click on
Submit .
2.
Change FK 4 to One or None as appropriate. - then click on Submit .
F
IELD
D
ESCRIPTION