Strata CIX 200, Programming Manual

Page: 335 / 508

IP Telephone Programming
IP Telephone Installation and Network Connection Setup
Strata CIX Programming Vol.1 12/09
8-21
IP T
e
le
phone
Pr
ogra
mming
260 Full IP Station Assignment
Prerequisite Program: CABINET SLOT PCB ASSIGNMENTS
This command assigns IP station and MAS HMP resources to the GIPx, MIPU and LIPU/LIPS interfaces.
1. Select Station > Station Assignments, and click on the Basic tab.
2. Enter a DN number in the Primary DN field or click one of the following buttons:
• List – view a summary list of programmed DNs.
• Extended List – view a detailed list of programmed DNs.
• Create – Assign a new DN with custom settings by entering a DN value. Press OK , assign the PDN
Equipment No. and click Submit .
• Selective Copy – Enter a DN in the Primary DN field and click Selective Copy to make a new DN
assignment with settings copied from the DN entered in the Primary DN field.
• Delete – Enter a Primary DN or a range of Primary DNs to delete and click OK .
• Change DN – Enter a DN in the Primary DN field and click Change DN . Enter the new DN
assignment and click OK .
3. Setup the DN by adding values to the remaining fields.
4. Click Submit .
Note The max. number of IP telephones programmed on one MIPU (MIPU24) is 24; the GIPU8 is 8.
F
IELD
D
ESCRIPTION
00 Prime DN Prime DN (enter an existing PDN or enter a PDN you wish to create for a new station).
01 Type Assign device types to GIPx, MIPU, LIPU/LIPS ports.
•
IPT2000 series, IP5000 series telephones, and IP Softphones are IPT
(require End Point License).
•
SIP telephones are SIP (require End Point license).
•
IP Attendant Consoles are ATTENDANT (require Basic Port License).
•
VM Ports are VOICE MAIL (require Basic Port License and MAS HMP
resource).
•
ACD Announcers are ACD ANNOUNCE (require Basic Port License and
MAS HMP resource).
Note IPT1020 telephones cannot be assigned to GIPx, MIPU, LIPU/LIPS -
they must be assigned to a BIPU-M using Prog 200.