Strata CIX 200, Programming Manual

Page: 253 / 508

Station
Setup Wizards
Strata CIX Programming Vol.1 12/09
5-49
1. Select Station > DN SetUp > Multiple DN.
2. Click Start . Strata eManager automatically assigns the:
•
Appropriate number of PhDN buttons onto the telephone. These operate as PDN buttons on the
telephone. PhDNs are assigned in sequence starting with the first button above the PDN.
CAUTION! If other buttons were installed in a PhDN location they will be overwritten.
•
Appropriate telephone as the owner of the PhDN buttons starting with the PhDN you specified.
•
PDN of the telephone as the name of the PhDN buttons.
•
PDN and appropriate PhDNs of the telephone to the appropriate Multiple DN Hunt group, starting
with the Hunt group number you specified.
3. Based on your requirements, enter the necessary fields.
4. Click Start to generate the request. The screen will change.
Important!
• This is a report that provides the Multiple DN assignments that will be sent to the CIX.
• Ensure that this information is correct before you click Continue . You can change the assignments by
clicking Back .
5. Click Continue to generate results into the CIX database.
Note To modify these entries later you will have to use the appropriate individual program assignments.
6. Review the configuration screen. This is how the multiple DNs are assigned in the CIX after the wizard
is done.
7. (Optional) To print the configuration results, click Print .
8. To exit, select a command from the Program pane.
VMID Range
This wizard reduces CIX programming time when you need to assign Voice Mail ID (VMID) codes. The
wizard will automatically assign specified VMID codes for a range of Primary DNs, PhDNs, and/or Pilot
DNs.
Specify the range of PDNs, PhDNs, or Pilot DNs that should have VMID code assignments. Then select
the VMID code assignment method.
The three code assignment methods are to assign the VMID to:
• Be the same number as the appropriate DN (PDN, PhDN or Pilot DN).
• Start at a specific number and increment by one for each consecutive DN.
• Be the same number for all DNs.
In addition to the above assignments, specific digits including * and # can be added to the front and/or back
of each VMID. This is not for Stratagy codes 91, 92, etc., they are set in Program 579.
You can program a range of VMID codes for PDNs, PhDNs and/or Pilot DNs.
1. Select Station > DN Setup > VMID Range.
2. Click Start . The input screen of the VMID Range Setup Wizard displays.
3. Select the type of VMID that should be assigned to the PDN, PhDN or Pilot DN. Then select the
assignment method and the digits, if any, to be added to front and/or end of each VMID. DN range is
supported. VMID prefix and/or suffix are supported. Click
Start to submit the settings to the CIX
database.