Strata CIX 200, Programming Manual

Page: 341 / 508

IP Telephone Programming
IP Telephone Installation and Network Connection Setup
Strata CIX Programming Vol.1 12/09
8-27
IP T
e
le
phone
Pr
ogra
mming
40 Auto-Campon to
PDN
Enable - to allow auto-campon to this PDN when busy and called by a CO line even if
the CO line group has auto camp-on disabled in Program 304-17.
Disable - to not allow auto camp-on to this PDN when called by a CO line if the CO line
group has auto camp-on disabled in Program 304-17.
Notes
1. Auto camp-on will always occur on the PDN if the calling CO line group has auto
camp-on enabled in Program 304-17 regardless of how this option is set.
2. Auto camp-on will be applied or not to PhDNs according to the PhDN owner PDN
setting for this option.
Possible values:Enabled (Default) or Disabled
41 LCR PDN Code Enter the number of digits that determine when to send the LCR PDN code. The PDN
code is registered in the LCR Modified Digits Table.
Possible values:G711, G729A (Default), None
42 Network Calling
Number
Enter the CLID telephone number that should be sent for this station when making
external calls through the Strata Net ISDN network (32 digits max.). When this station
makes outgoing calls through the Strata Net network this number will be sent over the
Strata Net to the terminating PSTN connected to the far-end node (providing this is
allowed by the PSTN). This number will be displayed as the Caller ID number. This
number is not sent to local PSTNs connected to the node from which the call is
originated, nor is it sent when making conventional Tie line calls that terminate on a
PSTN at a far-end node.
Possible values:32 Digits max.
43 Security Code Used for log in to My Phone manger when Voice Mail does not exist. This Security
Code is also used for IP User Mobility. If #49 is set to Enable, this field must be given a
value.
Possible values:16 Characters Max
44 My Phone
Manager Level
Enter the Personal Admin user privilege level for this station.
Possible values:Normal (Default), Super1 or Super2.
45 Speaker OCA Enable or disable Speaker OCA on an IP telephone. When speaker OCA is assigned to
an IP telephone, an additional IP port is assigned to the IP telephone. If there is no
available IP port, S-OCA cannot be assigned and an eManager error will occur.
Possible values:Enabled or Disabled (Default)
49 IP Phone Login
Password
Determines whether a password is required for phone login. Used for both MyPhyone
Manger and for IP User Mobility, as well. If set to Enable, a password is required in #43.
Possible values:Enable (applies a phone login password) or Disabled (Default)
50 Use Transfer
Registration
Whether or not apply Transfer Reg. - Set to Enable to allow IP Mobility for this DN.
Possible values:Enabled or Disabled (Default)
Note Assign a Phone Logout feature key on this DN.
F
IELD
D
ESCRIPTION