Strata CIX 200, Programming Manual

Page: 281 / 508

Trunks
ISDN
Strata CIX Programming Vol.1 12/09
6-27
T
runks
01 BRI Equipment
Number
Enter the BRI equipment number assigned to this channel group.
Enter data as XXYYZZ:
• XX=cabinet 01~12
• YY=slot 01~10
• ZZ=analog trunk circuit 01~08
or
• ZZ=T1channel 01~24.
Example: If a line should be assigned to an RBSU in cabinet shelf 5, slot 2, circuit 3,
enter 050203.
Cabinet numbers:
CIX100: Base, Exp.01
CIX200: Base 01, Exp.02
CIX670: Base 01, Exp 02~07.
CIX1200: Base 01, Exp 02~12
Slot numbers:
CIX100: Base 01, Exp.05~08
CIX200: Base/Exp.01~04
CIX670/1200: Base 01~08
CIX670/1200: Exp.01~10
02 Protocol Select the ISDN protocol. Only Bearer capabilities specified by the protocol can be
entered in this field. The Initial value for ISDN Protocol corresponds to information
set in the hardware level.
Possible values:Nat’l ISDN (default), ETSI, TTC or Nat’l ISDN Nortel
National ISDN = North America, ETSI = England and TTC = Japan.
03 Incoming Line Group ILG assignments must be made for basic ISDNs to process the calls being
received.
Possible values:1~32 CTX/CIX/100, 1~50 CTX/CIX 670 BCTU only or BBCU only,
1~128 CTX/CIX670 BCTU + BEXU or BBCU + BECU, 1~50
CIX1200 HCTU only, 1~128 CTX670 HCTU + HEXAU, 1~220
CTX670 HCTU + HEXBU
(default = 0)
04 Outgoing Line Group OLG assignments must be made for basic ISDNs to process the calls being
originated.
Possible values:1~32 CTX/CIX/100, 1~50 CTX/CIX 670 BCTU only or BBCU only,
1~128 CTX/CIX670 BCTU + BEXU or BBCU + BECU, 1~50
CIX1200 HCTU only, 1~128 CIX1200 HCTU + HEXAU, 1~220
CIX1200 HCTU + HEXBU
(default = 0)
06 Bearer Svc - Speech Enable speech capability. See Table 6-1, “Bearer Capability Table” on page 29 .
Possible values:Enable (default) or Disable
F
IELD
D
ESCRIPTION