Strata CIX 200, Programming Manual

Page: 350 / 508

IP Telephone Programming
xIPU and IPT Program Update
8-36
Strata CIX Programming Vol.1 12/09
IPT Program Update
The IPT program update function consists of retrieving the updated file from an FTP server, updating and
rebooting the selected IPT.
CAUTION! Do not run other updates simultaneously.
Prerequisites
1. Make sure that the networking devices between xIPU, IPT and the FTP server meet the requirements
for IP-CIX (min 100Mb/s switching hub(s)).
2. Create an account on the machine designated to be the FTP server.
3. Create an FTP virtual directory on the FTP server machine and specify the physical location of the
updated file on the FTP server machine.
4. The FTP server machine IP address should be configured such that it is visible by the xIPU IP address.
Note Use the IP-B Prog. to update IP telephone sets connected to BIPU cards.
Use the IP-L Prog. to update the later IP telephone sets connected to MIPU/GIPU/LIPU cards.
Programming
1. Select Maintenance > IP Firmware Update > IPT B Update. Then select the BIPU card slot.
— OR —
Select Maintenance > IP Firmware Update > IPT_L/M/G Update. Then select xIPU card slot
2. Select IPTs to be updated.
3. Repeat step 2 and 3 for multiple updates.
4. Enter the FTP information.
5. Click Start to begin the IPT Program update.
Notes
•
All selected IPTs are updated sequentially.
•
Maximum of 128 IPTs can be selected in one IPT update process.
F
IELD
D
ESCRIPTION
User Name Enter the user name of the account created on the FTP server.
Password Enter the password for the account created on the FTP server.
IP Address Enter the IP address of the FTP server machine.
Data Directory Enter the name of the FTP virtual directory on the FTP server.
File Name Enter the name of the updated file (apph248.out).