Strata CIX 200, Programming Manual

Page: 206 / 508

Station
Assignment
5-2
Strata CIX Programming Vol.1 12/09
Table 5-1 Station Assignment Data for IP, and SIP Telephones (Prog 260)
00 Prime DN Prime DN (enter an existing PDN or enter a PDN you wish to create for a new
station).
02 PDN Equipment Number Enter the PDN equipment number (0000 means auto assignment).
• IPT1020-SD must be installed on BIPU-M; IPT1020 cannot be installed on
LIPU/LIPS, MIPU or GIPx.
• SIP phones must be installed on LIPU/LIPS, MIPU or GIPx; SIP phones
cannot be installed on BIPU-M
• IPT2000 series and IP Softphones can be installed on LIPU/LIPS, MIPU,
GIPx or BIPU-M (see Prog 260 for LIPU/LIPS, MIPU or GIPx PDN
assignments). MIPU and GIPU require R5.0 software or higher.
Cabinet numbers:
• CIX100: Base, Exp.01
• CIX200: Base 01, Exp.02
• CIX670: Base 01, Exp 02~07.
• CIX1200: Base 01, Exp 02~12
Slot numbers:
• CIX100: Base 01, Exp.05~08
• CIX100: ACTU Relay Equipment= Cab 02, Slot 05.
• CIX100: ASTU Equipment=010901 and 010902
• CIX200: Base/Exp.01~04
• CIX200: LSLU Equipment=010401 and 010402.
• CIX670/1200: Base 01~08
• CIX670/1200: Exp.01~10
CTX28 and CIX40 assignments below are hard coded and cannot be
changed.
01, 05 – GVMU - 28, GVPH - 40 R1HW, GIPx, MIPU or GCOCIH - 40 R2HW
01, 06 – GIPx, MIPU16 or GCOCIH - 40 R1HW, no card - 28, 40 R2HW
01 Type Assign device types to GIPx, MIPU, LIPU/LIPS ports:
IPT2000-series telephones and IP Softphones are IPT (require End Point
licenses).
SIP telephones are SIP (require End Point license).
IP Attendant Consoles are ATTENDANT (require Basic Port License).
VM Ports are VOICE MAIL (require Basic Port License and MAS HMP
resource).
ACD Announcers are ACD ANNOUNCE (require Basic Port License and MAS
HMP resource).
Note IPT1020-SD telephones cannot be assigned to GIPx, MIPU, LIPU/
LIPS; they must be assigned to BIPU-M in Prog 200.