Strata CIX 200, Programming Manual

Page: 214 / 508

Station
Assignment
5-10
Strata CIX Programming Vol.1 12/09
204 DKT Parameters
Prerequisite Program:
200 page 5-1
This command is used to set up DKT digital telephone station parameters.
1. Select > Station > Station Assignments.
2. Click on the DKT tab.
3. To modify an existing station, enter its DN number in the Primary DN field or select a DN from the list on
the right side of the screen.
4. To create a new DN with custom settings click Create in the Basic tab. A dialog box will appear.
• Select DKT/SLT/IPT_B/SL_VMU if you are creating a Digital Key Telephone, Single-line Telephone
or IPT-1020SD.
• Enter the desired values.
• Click OK .
5. Delete (Basic tab) – Enter a Primary DN or a range of Primary DNs to delete and click OK .
6. Change DN (Basic tab) – Enter a DN in the Primary DN field and click Change DN . Enter the new DN
assignment and click OK .
• Setup the DN by adding values to the remaining fields.
• Get Default sets all values to factory default.
• Click Submit .
F
IELD
D
ESCRIPTION
01 Station Type Select the Station Type. When set to Attendant the system can support four
circuits.
Possible values:Extension (default) or Attendant
02 Key Strip Pattern This option allows you select a pre-defined keystrip pattern and submit it to
the digital telephone. It does not display what pre-defined keystrip (if any)
has been assigned to the telephone.
Use the Key tab screen to view or edit telephone keystrip assignments.
CAUTION! Submitting a keystrip pattern will overwrite existing keys
programmed on a telephone.
Default key strip patterns for digital telephones. The selected pattern is
applied to the 'Key Strip Type' parameter.
None – applies PDN to button 01 and blank to all other buttons.
Pattern 1 – applies PDN to button 01, plus line buttons and DND.
Pattern 2 – applies PDN to button 01, plus line buttons, One-Touch buttons
and DND.
Pattern 3 – applies PDN to button 01 and blank to all other buttons.
(DKT3014/3214 uses only Pattern 1 or None).
Possible values:Pattern 1, 2, 3, or None (default)