Strata CIX40, CIX100, CIX200, CIX670 and CIX1200 General End User
Information
The Strata CIX 40, CIX100, CIX200, CIX670 or CIX1200 Digital Business Telephone System is registered
in accordance with the provisions of Part 68 of the Federal Communications Commission’s Rules and
Regulations.
FCC Requirements
Means of Connection: The Federal Communications Commission (FCC) has established rules which
permit the Strata CIX system to be connected directly to the telephone network. Connection points are
provided by the telephone company—connections for this type of customer-provided equipment will not be
provided on coin lines. Connections to party lines are subject to state tariffs.
Incidence of Harm: If the system is malfunctioning, it may also be disrupting the telephone network. The
system should be disconnected until the problem can be determined and repaired. If this is not done, the
telephone company may temporarily disconnect service. If possible, they will notify you in advance, but, if
advance notice is not practical, you will be notified as soon as possible. You will be informed of your right to
file a complaint with the FCC.
Service or Repair: For service or repair, contact your local Toshiba telecommunications distributor. To
obtain the nearest Toshiba telecommunications distributor in your area, log onto www.toshiba.com/taistsd/
pages/support_dealerlocator.html or call (800) 222-5805 and ask for a Toshiba Telecom Dealer.
Telephone Network Compatibility: The telephone company may make changes in its facilities, equipment,
operations, and procedures. If such changes affect the compatibility or use of the Strata CIX40, CIX100,
CIX200, CIX670 or CIX1200 system, the telephone company will notify you in advance to give you an
opportunity to maintain uninterrupted service.
Notification of Telephone Company: Before connecting a Strata CIX system to the telephone network, the
telephone company may request the following:
1.Your telephone number.
2.FCC and ACTA registration
• Strata CIX 40, CIX100, CIX200, CIX670 or CIX1200 may be configured as a Key, Hybrid or PBX
telephone system. The appropriate configuration for your system is dependent upon your operation of
the system.
• If the operation of your system is only manual selection of outgoing lines, it may be registered as a Key
telephone system.
• If your operation requires automatic selection of outgoing lines, such as dial access, Least Cost
Routing, Pooled Line Buttons, etc., the system must be registered as a Hybrid telephone system. In
addition to the above, certain features (tie Lines, Off-premises Stations, etc.) may also require Hybrid
telephone system registration in some areas.
• If you are unsure of your type of operation and/or the appropriate FCC registration number, contact
your local Toshiba telecommunications distributor for assistance.
FCC Registration Numbers
SYSTEM
PBX
Fully-protected PBXs
Hybrid
Fully-protected multifunction system
s
KEY
Fully-protected telephone key systems
CIX40
CJ6PF03BDTCHS402
CJ6MF03BDTCHS40
CJ6KD03BDTCHS40
CIX100
CJ6MUL-35931-PF-E
CJ6MUL-35930-MF-E
CJ6MUL-35929-KF-E
CIX200
CJ6PF03BDTCHS192
CJ6MF03BDTCHS192
CJ6KD03BDTCHS192
CIX670
CJ6MUL-35931-PF-E
CJ6MUL-35930-MF-E
CJ6MUL-35929-KF-E
CIX1200
CJ6MUL-35931-PF-E
CJ6MUL-35930-MF-E
CJ6MUL-35929-KF-E
Summary of Contents for CIX 200
