Services
Strata Net Over IP
9-42
Strata CIX Programming Vol.1 12/09
04 H.323 Fast
Connection
Fast connection should be enabled for H.323 protocol only when the remote
end has this option enabled. This should be disabled for Strata Net IP
Protocol.
Possible values:Enable (default) or disable
05 Channel Negotiation
Select whether channel negotiation for Call Control is applied or not. This
parameter must match on both nodes of an end-to-end connection on the IP
network. This programming is applied only to H.323 protocol.
Possible values:Enable or disable (default)
06 Audio Codec
Select the desired audio codec type.
Important!
G.711 must be used for transmission of end-to-end
DTMF signaling. G.711 provides the highest voice
quality but requires the most bandwidth.
This parameter must match on both nodes of an end-to-end connection on the
IP network.
Possible values:G711(default), G.711MU, G.711A, or G729A
07 DTMF Translation
Select of whether DTMF translation by the control channel is enabled or not.
This parameter should be enabled when using G.729A codecs and disabled if
using G.711 codecs for end-to-end DTMF signaling.
This parameter must match on both nodes of an end-to-end connection on the
IP network.
Possible values:Enable or disable (default)
08 E911 Priority
If E911 calls originated from this CIX should be sent over the IP network to the
selected remote node, enter the E911 priority assignment that should be used
for the selected remote node. Assign 0 or 1~5.
Assign 1, the highest priority, to the remote node that has the main CAMA or
ISDN E911 connection; 2~5 reduces the E911 priority with 5 providing the
lowest priority - these priorities should be used for alternate network routing of
E911 calls.
If E911calls should not be sent over the IP network to the selected node,
assign 0 as the E911 priority.
Note
If two or more remote nodes have the same priority, E911calls
will route to the CIX with the lowest node number.
Possible values:0 (default) ~5
F
IELD
D
ESCRIPTION
Summary of Contents for CIX 200
