Strata CIX 200, Programming Manual

Page: 331 / 508

IP Telephone Programming
IP Telephone Installation and Network Connection Setup
Strata CIX Programming Vol.1 12/09
8-17
IP T
e
le
phone
Pr
ogra
mming
250 IP Telephone (Station) Data Assignment
Prerequisite Program: None
This command configures IP stations in the system.
1. Select IP-Telephony > IPT Data.
2. Enter a DN number in the Prime DN field or select a DN from the list displayed on the right.
3. Setup the DN by adding values to the remaining fields.
4. Click Submit .
F
IELD
D
ESCRIPTION
00 Prime DN Enter the IP telephone Prime Directory Number (PDN)
01 Station ID Station ID is set from the IP telephone to match its PDN in station programming.
The station ID is the same as the station PDN unless there is more than one
CTX/CIX system with BIPU-M, GIPx, MIPU, LIPU/LIPS on the same network. In
this case the station ID for each IP telephone must contain the CTX/CIX Node
ID+PDN.
Possible values:Up to 5 ASCII characters
02 Station IP Address Type Select the Station IP Address to be static 'fixed' or dynamic in which case it
obtains an IP address from a DHCP server.
Possible values:Fixed or Any (Default)
03 Station IP Address Enter the Station static IP Address if a static address is needed per Station IP
Address Type set in 02 above.
Possible values:XXX.XXX.XXX.XXX where XXX = 0 ~ 255
04 Auto Assign Station ID Use Automatic when the IP telephone has no Station ID. Use Not Automatic
when IP telephone has station ID in the IP telephone setting. In Program 150,
field 01 is the same parameter for system.
When Don't Care is set, program 150-01 precedes in Program 250-04.
Enabling Program 150-01 is equal to using automatic in Program 250-04.
Disabling in Program 150-01 is equal to not automatic in Program 250-04. When
the IP telephone requests to connect to a Strata CIX with no station ID, the CIX
searches for a PDN that is set in this parameter as automatic and sends the
PDN to the IP telephone. The IP telephone records it in the IP telephone setting.
Possible values:Permitted, Not Permitted or Don’t Care (Default)