Strata CIX 200, Programming Manual

Page: 285 / 508

Trunks
ISDN
Strata CIX Programming Vol.1 12/09
6-31
T
runks
01 Equipment No. Enter the RPTU, BPTU or BIPU-Q equipment number as xxyyzz.
Enter data as XXYYZZ:
• XX=cabinet 01~12
• YY=slot 01~10
• ZZ=T1channel 01~24
or
• ZZ=analog trunk circuit 01~32
Example: If a line should be assigned to an RCOU in cabinet shelf 5, slot 2,
circuit 3, enter 050203.
Cabinet numbers:
• CIX100: Base, Exp.01
• CIX200: Base 01, Exp.02
• CIX670: Base 01, Exp 02~07
• CIX1200: Base 01, Exp 02~12
Slot numbers:
• CIX100: Base 01, Exp.05~08
• CIX200: Base/Exp.01~04
• CIX670/1200: Base 01~08
• CIX670/1200: Exp.01~10
02 Protocol The Protocol to be followed defines the type of interface expected based upon
the equipment type at the distant end of the connection.
In North America, the choices are 1-Bellcore National ISDN; 4-Bellcore National
ISDN NT; or 5-QSIG (Strata Net).
Use IP for BIUP-Q, IP QSIG (Strata Net).
Use QSIG for RPTU/BPTU, PRI QSIG (Strata Net)
Possible values:National ISDN, ETSI, TTC, National ISDN Nortel or QSIG
(default = None)
03 Incoming Line Group ISDN and Strata Net need to have trunk group assignments to process the calls
being received. If multiple trunk groups are used within the channel group, then
Call-by-Call Services must be used.
Possible values:0~32 (CIX100), 0~50 (CIX200, CIX670/CIX1200 Basic),
0~128 (CIX670 Exp, CIX1200 Exp A), 0~220 (CIX1200 Exp B)
(default = 0)
F
IELD
D
ESCRIPTION